Innokin Prism S Coils

These Innokin Prism S coils are designed to fit in the Innokin Prism-S Tank that come as part of the Endura T20-S and EZ.WATT vaping starter kits. In either Sub Ohm (Direct to Lung) or Plus Ohm (Direct to Lung), you can use any mix of E Liquid by simply using the correct coil.

These coils will only work with the Innokin Endura Prism-S Tank!

Coils with a resistance less than 1ohm are known as Sub Ohm coils. These coils require a lot of power and heat up very quickly. To make sure your E Liquid doesn’t vaporise too fast leading to burned coils, we recommend using a thicker High VG E Liquid like our 70/30 E Liquids (70% VG to 30% PG).

Coils with a resistance above 1ohm are known as Plus Ohm coils. These coils don’t require as much power to heat up and don’t get as hot as their Sub Ohm cousins. Because of this, thinner E Liquid is used so the coil doesn’t get clogged up too quickly. We recommend using a thinner High PG E Liquid like our 50/50 E Liquid (50% VG to 50% PG).

Prism S 0.8Ω Coil
– Recommended 16-18w

Prism S 0.9Ω Coil
– Recommended 14.5-18w

Prism S 1.5Ω Coil
– Recommended 13-14w

If you want to know more about E Liquid mixes and ratios, have a look at our E Liquid Guide. To learn more about coils and resistances, our Vape Coil Guide has all the information you need.